Blog / Little Rock Hyundai Service

6 Signs You May Need to Replace Your Brake Pads

Rear view of a parked, gray 2021 Hyundai Sonata. | Hyundai dealer in Little Rock, AR.
Your brake pads are a vital brake part that provides the pressure and friction needed to slow down and stop your car safely. If you notice any of the following warning signs, act fast and ask the technician at your Hyundai dealer to replace the pads to ensure your safety on the road.

1. The Pads Are Worn and Thin

New pads are between eight to twelve millimeters in thickness. For the pads to provide you with enough stopping power, they must be thicker than 6.4 millimeters. If the pads are thinner than 3.2 millimeters, it's best to replace them promptly to prevent your brakes from failing. Look between the wheel spokes and check the thickness of the pads. If the pads look worn and thinner than a quarter of an inch, ask your Hyundai technician to replace them as soon as possible.

2. Your Car Takes Longer To Stop

When the pads are worn and thin, your brakes will be unresponsive. You will notice that you have to press down on the brake pedal harder to get your car to slow down and come to a complete stop. To avoid further reducing your stopping power and the pads from wearing down altogether and risking your safety, ask your technician to replace the pads ASAP.

3. You Hear Squealing Sounds

If you hear high-pitched squealing and screeching sounds when you step on the brake pedal, it's the wear indicators warning you that the pads are wearing thin. The wear indicators are tiny monitoring devices built into the pads by the manufacturer. When you hear that tell-tale screech, it's time to replace the pads.

4. There Are Awful Grinding Noises

If you didn't replace the pads when you heard the high-pitched squealing and screeching sounds, you will soon begin to hear awful grinding noises. The pads have now worn down to the bare metal, and the grinding noises you hear are from the bare metal scraping against the steel and causing damage to the rotors.

5. You Feel Vibrations Through the Brake Pedal

When your pads get too thin and worn, it will cause vibrations that you will feel through your brake pedal when you step on the brakes. When your technician replaces the pads, the vibrations will be a thing of the past.

6. Your Car Veers to the Side

If your car veers to the side, the pads could be worn down unevenly. Your car's pads don't wear at the same rate, and when one side is more worn or thinner than the other, it will cause your vehicle to pull to the right or left. Ask your Hyundai technician to replace the pads to sort out the issue fast. When you notice any of the signs mentioned above, don't wait until it's too late and you don't have the stopping power when you need it. If you hear high-pitched squealing or grinding noises, feel vibrations, your car pulls to the side, or takes longer to come to a stop, visit Crain Hyundai of Little Rock today for a thorough brake inspection performed by qualified Hyundai technicians. Image via Hyundai.
Posted in:

Related Posts

Profile view of a navy blue 2023 Hyundai Palisade. | Cars for Sale in Little Rock, AR | Crain Hyundai of Little Rock

Does Your Hyundai Have a Faulty Ignition Coil?

As a motorist, it's important that you keep your vehicle in good working order and address any issues to keep everyone safe and avoid damage to your car. That's why, if you notice any indications that your car may have a faulty ignition coil, you should get yourself down to your local Hyundai dealer at the first opportunity. That way, they'll be able to accurately diagnose the problem and perform any necessary repairs to get you safely back on the road. What Is an Ignition Coil? Ignition coils are a key component found in the engine of virtually all gasoline-powered cars. They take the electricity provided by the car's battery into the powerful bursts that the spark plugs to ignite your fuel and oxygen. This releases the energy from the gasoline and uses it to power your engine, allowing you to get where you need to go. How Do Ignition Coil Faults Develop? As with all parts of your car, ignition coils can only work well for so long. Although ignition coils are designed to last around 100,000 miles or potentially even longer, they can develop faults before this. These faults could be caused by anything from a faulty spark plug to moisture or even excessive heat and vibrations from the engine. What Are the Signs That I Have a Faulty Ignition Coil? There are a number of signs that can point to there being an issue with one of your ignition coils. The most obvious is your check engine light showing, but there are other changes to your driving experience that can also point to the same problem. If your engine starts to misfire or backfire, your car begins to stall more often, or your performance and acceleration decline, the issue may be with one of your ignition coils. What Should I Do if I Suspect My Ignition Coil Is Faulty? If you suspect that your ignition coil, or any other part of your engine, has developed a fault, it's important that you don't ignore the problem. Not only can doing so lead to more problems with your engine in the future, but it can also present a safety risk in some cases. We would also recommend against trying to address the issue yourself as this can come with a risk of injury and improperly performed repairs could make your car less safe or lead to further damage. It's far better to turn to a professional for assistance. How Can My Hyundai Dealer Help? When you choose to have your servicing and repairs carried out by a trustworthy and reliable dealership, you can be sure that the work will be performed by Hyundai experts to the highest standards. We will assess the state of your engine, accurately identify any problems, and perform the repairs necessary to have you driving safely and comfortably again in no time. Whether your Hyundai is showing signs of engine trouble or you just want the assurance that comes with a professional service, contact Crain Hyundai of Little Rock to book an appointment with us.

Close view of everything under the front hood of a 2023 Hyundai Kona. | Hyundai dealer in Little Rock, AR.

How Often Should You Replace Your Hyundai's Spark Plugs?

Plugs are one of the most important parts of your vehicle. They are responsible for igniting the fuel and air mixture that powers your car, so regular maintenance at a Hyundai dealer is essential for good performance and fuel economy. That's how you eliminate guesswork from the spark plugs equation. How Long Do Spark Plugs Last? Generally, plugs last between 30,000 and 90,000 miles but can be replaced sooner if there's a misfire or other performance issue. This huge difference between the minimum and maximum plug life is due to differences in driving conditions, engine configuration, and other variables. We recommend getting preventive maintenance at an authorized Hyundai service center for the best results. Mechanics in these car clinics are familiar with your vehicle and its configuration, so they are in the best position to judge whether or not it's time for a plug replacement. The last thing you want is a car that keeps stalling on you. What Happens If You Don't Replace Plugs at a Hyundai Dealer? You might experience several symptoms if you don't replace your plugs at an authorized dealership. These include: Poor engine performance Decreased fuel efficiency Difficulty starting the car Poor performance can be attributed to the old plugs not firing correctly or having unequal gaps that cause misfiring in the cylinders. A decrease in fuel economy is driven by inefficient combustion due to bad plugs. And difficulty starting the car is caused by a weak voltage that has trouble igniting the fuel and air mixture in the cylinders. Do All Plugs Need To Be Replaced at the Same Time? Plugs don't need to be replaced at the same time. If one spark plug performs worse than the others, it can be replaced first, and the other can be checked for performance later. However, it's best to get all of them replaced together. This will save time and help avoid any confusion or misdiagnosis resulting from a combination of old and new plugs. Spark Plug Gapping Gapping your plugs is also important. Plugs should be gapped to the exact specification to fire properly. If they are not gapped correctly, they will cause misfiring and other performance problems. The gapping issue happens when you get generic plugs instead of asking a Hyundai expert to provide you with the right ones. Generic plugs come pre-gapped but may not be the correct size for your engine. Now that we can all agree that plug replacement is an important part of owning a Hyundai, call Crain Hyundai of Little Rock to schedule an appointment. We will promptly replace your plugs with the right parts so you can drive at peak performance all the time.

Profile view of a parked, gray 2023 Hyundai Santa Cruz. | Hyundai service in Little Rock, AR.

What Should You Do If Your Hyundai Gets Dented?

No driver wants to see a dent in their car. Dents can be caused by a variety of things, but the result is always a blemish on your car. If you have any dents, your Hyundai dealer has the expertise and technology to easily repair them for you. Some drivers prefer a DIY approach and want to fix the problem themselves. These are the two options for repairing car dents. DIY Approach If you enjoy DIY, you may want to try removing the dent yourself. There are several different methods you can use depending on the type of dent and its location. These are some of the ways you can remove a dent at home using common household items. Plunger A plunger can not only clear a blockage, but it can also help in removing dents. Use a clean plunger and fit it around the dent you want to remove. Once the plunger is securely attached, pour water over the head of the plunger and the dented area. Push the plunger in and out as you would when you're clearing a blockage. This method can be helpful on small dents, as the dented area must fit inside the rubber head of the plunger. It can take some time, but you should see the dent pop out again. Hairdryer This method uses a hairdryer, aluminum foil, and a piece of dry ice the size of the dent. To start, heat the dented area with the hairdryer. Once the dented area is warm to the touch, spread the aluminum foil over the dent. Put on work gloves, and rub the block of dry ice over the aluminum foil. The rapid change in temperature between hot and cold should cause the dent to pop out very quickly. You can also use a can of cold compressed air as an alternative to dry ice. Visit Your Dealer Removing a dent yourself can be satisfying but requires time and effort you may not have available. The above methods and all other DIY solutions will only work on minor dents. Depending on the location of the dent, DIY may not work at all. As your dealer, we have a state-of-the-art repair facility and Hyundai-trained technicians available to fix the problem. We have the technology to swiftly remove dents of any size from your car and return it to like-new condition. Dents sometimes involve damaged paint, and we can match your car's color in our paint shop. Our technicians are also experts at repairs and can remove a dent for you very quickly. Call our service department today at Crain Hyundai of Little Rock. Our technicians can remove any dent or damage.